PRO-FILL
THE TUB WEIGHS MORE THAN THE FILLER!
This revolutionary filler is less than 1/3rd the weight of Microballons! - Mix with PVA, Epoxy, Fibreglass Resin, dope, Paint - in fact almost anything! Bonds well, Sands easily, less shrinkage & doesn't crack Fills holes / cracks with very little weight! When mixed with Epoxy it "melds" with the epoxy to become a glue! - use it like this to stick epoxy cowls, spats etc together.
Want to Save even more money? -because it's easier to post out in bags - we will offer the same quantity (in resealable "zip" bags rather than a plastic tub) for just £5! -choose in the options below......
Micro balloons
Why pay a fortune for lightweight fillers that may not be exactly what you need. Most of them are based on these Micro Balloons - Mix with PVA, Epoxy, Fibreglass Resin, dope, Paint - in fact almost anything!
Bonds well, Sands easily, less shrinkage & doesn't crack
Fills holes / cracks with very little weight!
Want to Save even more money? -because it's easier to post out in bags - we will offer the same quantity (in re-sealable "zip" bags rather than a plastic tub) for just £4! -choose in the options below......
Skin Crylic has revolutionised how we cover Wings and Fuselages.
We would all like to glass skin our models but the process is not easy. Here’s the solution….Paint on wing skinning cloth! (well almost) This highly developed Acrylic just brushes over the cloth, bonding it to the wing and when it sets completely, it makes a very tough surface similar to glass resin skinning but a whole lot easier! Can also be used on its own for sealing bare wood and foam areas. Yes – it can be used directly over exposed foam! And the brushes wash out in water too! How easy do you want it?
Fibreglass Cloth
in Packs of 3 meters x 1 meter (Also available 'to order' in any length on request)
Standard pack size 3 metres x 1 metre.
Fibreglass Cloth available in various weights and lengths.
25/30 gram (approx) Woven glass cloth for wing skinning on suitable surfaces for model aircraft wings, fuselage etc.
50 gram a slightly heavier cloth where weight isn't too big a problem and is suitable for wings, fuselage etc.
70/100 gram suitable for strength and reinforcing or repair of cowls etc
Fibreglass matting various sizes available.
All light weight are easily applied using skin crylic which we also supply
(Please ring to confirm weights available)
Heavy duty Woven-Roven and other Composite materials also Available
Foaming PU Glue (approx 250ml bottle )
No Mixing or Hardeners— Activated by the moisture in the air!
—Quick Setting—Sand able when set
-Very strong surface bond
Also good for lightweight gap-filling & fillets.
Repair foam wings (working time 1-3 mins, sets in
5-8 mins, completely cured in 15 mins)
-Use neat for hard finish strong glue-little expansion.
Great for strengthening fillets
· Spray a little water on the glue to act as a medium foam filler–
(e.g. Repairing foam wings)
· Mix with water then pour into gap to create a massive foaming effect
(>10x volume) for filling larger areas
Use thinly from nozzle or with spreader. Reseal container. Keep out damp air.
3 Products in one! Good for all Woods & Foam.
